Rentech

Rentech, which was founded in 1996, custom designs and builds boilers for the petro-chemical, refining, power generation and other heavy industries. The company has customers across the U.S., Canada and 30 other countries. Rentech is the only privately held industrial boiler manufacturer in the U.S. You can depend on RENTECH boilers for reliable performance because of their quality and unique application to the needs of each of our customers. There is no inventory at RENTECH from which to select your boiler. That’s because we build each boiler to meet the conditions in which it will operate, and our experienced engineers and employees apply their skills in every step of the process, from design and manufacture to installation and service. Our quality control system assures you that we meet all code requirements and project specifications. The materials certification reports document the properties of the steel, and each product is subjected to careful inspections. RENTECH follows standards and codes of the American Society of Mechanical Engineers (ASME), the National Board of Boiler and Pressure Vessel Inspectors (NBIC) and others.

Sterling HVAC

“Sterling HVAC, the most recognized name in the game, has been producing industry leading high efficiency heating products for over 50 years. From traditional Unit Heaters to Rooftop and Indoor Make-Up Air Units, Sterling HVAC has the solution to fit every residential, commercial or industrial application. A division of Mestek, Inc. a family of over 36 specialty HVAC related manufacturers, Sterling HVAC proudly manufactures all of its products in Farmville, North Carolina USA. Known as a true innovator Sterling HVAC designs, engineers and manufacturers all of their heating products “”in-house”” and sets the standard for performance and quality accross the industry.”

Sourcetec

“Welcome to Sourcetec Industries, A North American company specializing in air purification equipment. With plants in Canada and the United States, we have the ability to fulfill the requirements of both these major, yet diverse markets. We want to be your source for all air filtration and fume removal concerns. Whether your project is simply a piece of hose or a complete central system, Sourcetec can satisfy your needs. At Sourcetec Industries, our combined 25 years of experience in engineering design and marketing gives you the opportunity to take advantage of the most current technology in air purification systems. If you don’t find what you’re looking for, we can custom design any system to suit your particular application.”

Technical Systems Inc

RAE Corporation specializes in the design and production of engineered heating, cooling, and refrigeration systems. Our corporate goal is to provide expertly designed cooling systems that meet the requirements of our most discerning customers. RAE Corporation manufactures products in four divisions; Century Refrigeration, RAE Coils, Refrigeration Systems and Technical Systems. We offer a complete line of HVAC heating and cooling coils for all your replacement and new construction needs. Whether it’s a basic duct booster coil or a custom coil, we can meet all of your specifications with accuracy, ease, and at a competitive price.

Tate Access Floors

“Raised Floor for both Office Buildings & Computer Rooms in 2 ½” to 48” finish floor heights, under floor Air distribution systems with our Air Highway plenum dividers. High Air Flow perforated panels both standard up to 2800 CFMEA to Directional perforations to 2500 CFM each. A complete offering for underfloor air sealing grommets.  Brushed sealing grommets for any size opening for New Construction or Retro-Fit Applications.”

PDU Cables

“PDU Cables power distribution cable assemblies are almost exclusively sold and installed into data centers or similar mission critical environments.  Power distribution cables are by definition an interconnecting power cable that brings power from a Power Distribution Unit (PDU) a remote power panel typically with circuit breakers overhead or under a data center floor to just below a rack or cabinet that houses dozens of servers.  These servers are plugged into a large power strip (rackmount PDU) and the rackmount PDU is then plugged into PDU Cables power distribution cable, thus completing the power circuit.  For failover purposes there are typically two power cables feeding each rack of servers.   Each power distribution cable sold is custom manufactured to the exact specifications of the data center, and the rack it is being used to power.  The power needs of each group of servers in a rack vary and as such each power cable will be different, with varying volt and amp configurations. Cost considerations and electrical wiring rules require that power cables are made to exacting lengths and each power cable is marked with labels identifying its components and power source and location within the data center.  Power cables are typically either manufactured on-site by in-house electricians, purchased from electrical contractors who manufacture in their own shops or bought as pre-fabricated assemblies (PDU Cables).  “

Marlo Coil

“Since 1925, DRS Marlo Coil has manufactured quality heat transfer, refrigeration, and air handling equipment for industrial, commercial, utility, and marine markets. Our custom engineered Marlo heat transfer solutions are used in a variety of configurations to cool, heat, and dehumidify air streams for process and building comfort. Our industrial heat transfer products are manufactured from quality materials typically in heavier grades and thicknesses. This ensures dependable performance and years of service, even in the most demanding conditions. Using the latest analysis technology DRS engineers coils for all types of applications, from common comfort heating and cooling to complex thermal processes. By using Computational Fluid Dynamics (CFD), we are able to accurately predict the air and water flow patterns through the coil. To ensure customer satisfaction, our products are efficiently manufactured in our modern production facility following LEAN manufacturing techniques and one or more of our quality assurance programs. All DRS Marlo heat transfer products are thoroughly tested prior to shipment. Coils are tested using high pneumatic pressure while the coil is submerged in water. Alternative test methods and air side testing are also available if needed. “

RAE Corporation

RAE Corporation specializes in the design and production of engineered heating, cooling, and refrigeration systems. Our corporate goal is to provide expertly designed cooling systems that meet the requirements of our most discerning customers. RAE Corporation manufactures products in four divisions; Century Refrigeration, RAE Coils, Refrigeration Systems and Technical Systems. We offer a complete line of HVAC heating and cooling coils for all your replacement and new construction needs. Whether it’s a basic duct booster coil or a custom coil, we can meet all of your specifications with accuracy, ease, and at a competitive price.